SINOFLOC anionic polymer flocculant are anionic polyacrylamide copolymer with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. Our anionic polyacrylamide is available in solid powder and emulsion forms.
Anionic Polyacrylamide (PAM) Specifications:
|
Products
|
Product Code
|
Anionic Charge
|
Molecular Weight
|
|
Anionic PAM Powder
|
SINOFLOC 9012
|
Slightly
|
Medium
|
|
Anionic PAM Powder
|
SINOFLOC 9014
|
Slightly
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9116
|
Low
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9118
|
Low
|
Very High
|
|
Anionic PAM Powder
|
SINOFLOC 9218
|
Medium
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9219
|
Medium
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9220
|
Medium
|
Very High
|
|
Anionic PAM Powder
|
SINOFLOC 9224
|
Medium
|
Ultra High
|
|
Anionic PAM Powder
|
SINOFLOC 9226
|
Medium
|
Ultra High
|
|
Anionic PAM Powder
|
SINOFLOC 9318
|
Medium
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9320
|
Medium
|
Very High
|
|
Anionic PAM Powder
|
SINOFLOC 9326
|
Medium
|
Ultra High
|
|
Anionic PAM Powder
|
SINOFLOC 9418
|
Medium
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9426
|
Medium
|
Ultra High
|
|
Anionic PAM Powder
|
SINOFLOC 9518
|
Strongly
|
High
|
|
Anionic PAM Powder
|
SINOFLOC 9526
|
Strongly
|
Ultra High
|
|
Anionic PAM Emulsion
|
SINOFLOC 932
|
Medium
|
Very High
|
As the anionic polyacrylamide suppliers. Anionic polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.
Products Feeding:
The solutions of SINOFLOC anionic polymers must be prepared in suitable plants equipped with dry anionic polyacrylamide powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10°C and 40°C; For a correct use of SINOFLOC anionic polyelectrolyte and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team. If you also need anionic polyacrylamide pam, please contact us.
Oilfield Chemicals
SINOFLOC supplies our customers a wide range of product portfolio in the oilfield industry. In addition to our standard sinofloc oilfield chemicals, we are also supplying customized products to our clients in the different condition of high TDS and API brine, as well as in specific particle size.
